Tips on how to lay fire bricks

Perhaps you have ever learned about sitting fire bricks for heater or kiln? Have you known about blast heater or cement rotary kiln? What you must pay attention to is sitting fire bricks when you plan to make furnace or kiln. Also, you must know about where you can find suitable cheap fire bricks on the market. So I will expose you some points on building kiln lining for cement rotary kiln layer. Show you a clean idea.

Preparatory be employed by Lounging Fire Bricks

First you should complete the subsequent basic work before you building kiln lining for bare cement rotary kiln.

Do complete inspection for kiln cover body before installing the brick lining. Cleanup and keep kiln body without fire clay and dried out.
Check the riveting position and weld joint. Fix or polish when necessary.
Brick retaining ring must be vertical with rotary kiln axial, make adjusting when necessary.
All of the equipment maintenance must be well done before bricking.

Brickwork Process of Laying Flames Stones

There are several points to attention while you are laying fire bricks.

Laying firebrick must apply the protection specification.

The basic requirements for laying http://kilnrefractory.com/fire-bricks-for-sale in the rotary kiln: brick lining cling with kiln shell body, stone next to brick, direct brickwork joint, accurate plastic ring, firm rider stone, right way, and no droop. In a phrase, be sure that brick lining works with kiln body without brick spalling. The stress for the brick coating should be distributed consistently on the whole kiln lining and each layered brick.

Adopt surrounding sleeping method. Make sure the brick cling with kiln body to prevent loose and distortion later.

Prior to laying firebrick, divide the baseline on the kiln body shell plate in line with the center line of kiln. Make brick lining target with kiln axis, purely in line with the baseline cut the bricks in the forward row. To obtain the bricking effectively, sometimes take horizontal and vertical welding line as the assistant baseline.

The moment laying firebrick, if there too many brick sectors, as one side stress will result the kiln body transformation. According to the laying process nowadays, lay refractory brick by surrounding in the organized kiln body. Adopt two standard brick to match two different rider large rock, which make sure the compact kiln lining. Make use of fire clay coating on the surface of bricking to reduce the brick distance.

Brick ring whipstitch: Work with a few common voilier and rider bricks to whipstitch after suitable match. Use a steel dish between alkali bricks.

Issues for Laying Fire brick

• Repair the transformation position of Kiln shell to be sure all the bricks on the kiln body safely and securely.
• Use a plate between panel brick circle and bricks.
• Do not change the brick type in the kiln tyre area.
• Rider brick can not be lower one half than original thick.
• Do not take up several sorts of different quality alkali brick.
• Make use of wooden mallet or silicone hammer when laying open fire bricks. Strictly prohibit use hammer.
• Avoid mismatch, incline, uneven mortar joint and mixed slurry when sitting firebrick.

There are plenty of types of fire bricks for your requirement. Choose a professional kiln refractory manufacturer to buy high quality flames bricks for sale, make sure furnace or kiln the longer service life. Advice you a professional refractory factory-Rongsheng, that can be manufacturing kilnrefractory.com for over 20 years that they can sure offer you quality fire stones on the market according to your special dependence on cement rotary kiln application.